K-6K-6 SilenzioK-6 Professional BaristaK-8 SilenzioK-10 ConicK-10 Conic WBCmolinos de cafémoulins à cafékaffeemühlenmacinadosatorimoinhos de caféк о ф
!iput the regulator back in place, turning it counter-clockwise as in Fig. 11 until the burrs touch and replace the 3 screws.10.4. Accessing the burrs
Index 1 - Machine description 2 - Instructions manual 3 - Identification 4 - Technical characteristics 5 - External components 6 - Installation
Identification3The following information is printed indelibly on the technical features plate:NOTE: The manufacturer reserves the right to modif
6InstallationExternal components 5129865321Hopper lidCoffee bean hopperSetting rollerGrind regulatorDispenser lidDispenser regulatorTamper13Support cr
7Regulation7.1. Preparing the coffee grinderPlace the hopper (2) on the grind regulator (6) and check that the shutter (4) is closed, as in Fig 1.Fig.
Fig. 3Connect the machine to the power supply, press the On-Off switch (14) and open the shutter (4) to let the coffee through. Remove the dispenser l
Fig. 6MoreLess8Operation8.1. UseTo turn the machine on and off use the On-Off switch (14). The machine will start to grind the coffee. If the automati
Fig. 8Fig. 9When using the telescopic coffee press option, place the portafilter on the crutch and push the coffee tamper downwards. Fig. 9. When using
NOTE: Never use damp clothes to clean the coffee deposit. Conserve the brush in a protected place and only use it to clean the g
Comments to this Manuals